Specification of Concrete Screed TRUSS SCREED HC50 HC100 WACKER NEUSON
TRUSS SCREED WACKER NEUSON HC50 HC100
Truss screed is a construction tool used for leveling and finishing concrete work on construction projects. This tool consists of several trusses or steel series designed to form a platform that varies in length, depending on the needs of the project. Truss screed works by balancing and compacting the concrete that has been poured onto the ground surface, resulting in a flat and smooth surface.
How Truss Screeds work
truss screed sale jakarta is operated by following a series of simple steps. First of all, concrete is mixed and poured over the prepared ground level. Then, the truss screed operator places the truss screed over the wet concrete, using the rope or tape measure provided to ensure that the surface is at the desired height. After that, the operator starts the truss screed machine and starts operating it, moving the tool back and forth in a longitudinal motion to compact and level the concrete.
Easier to Use: selling truss screed Jakarta is very easy to use, even by inexperienced operators. In some cases, this tool can even be operated by one person.
Conclusion
selling truss screed Jakarta is a construction tool that is very useful for leveling and finishing concrete work. With high work speeds, greater precision and ease of use, truss screeds can help save costs and time in construction projects. If you need tools for concrete leveling and finishing work, truss screed is a good and effective choice.
TRUSS SCREED WACKER NEUSON HC50 HC100
CENTER SECTION (HC)
Type HC50 HC100
Length 1.5m 3.1m
Weight 26 kg 52 kg
Beam Width 355mm 356mm
BeamHeight 475mm 476mm
Truss Screeds are designed for precise strike-off and consolidation of concrete surfaces up to 25 cm/10 inches thick where grade is desired. The bolted construction of the entire screed section allows for quick assembly without special tools. The T-bolt adjuster provides quick, precise adjustment for flat, crowned Wacker Neuson Truss Screed Vibrators or reverse strike-offs.
The winch system consists of two cranks located at the same end of the screed for one person operation.
Light weight, high strength aluminum truss for reduced weight and easy machine handling.
Connector plates with greaseable flange bearings provide rigidity, even vibration, and fast assembly during part assembly
Eccentric weights located near the shaft bearings to prevent the shaft from being damaged quickly and durable.
sell truss screed jakarta