phone Phone
+6281318900569
close
menu

PT. Getar Gemilang Sakti

sql
BAR CUTTER STRONG
BAR CUTTER STRONG
BAR CUTTER STRONG
Hover to Zoom

Sell BAR CUTTER STRONG



Specification of BAR CUTTER STRONG

The STRONG bar cutter is an electrically driven reinforcement cutter so cutting can be done much more quickly and save power. In addition, the diameter of steel or iron that can be cut is also much larger than the cutting using manual concrete shears.

The STRONG bar cutter consists of a wide range of aperture blades that can be used to cut the diamond with various diameters. The smallest blade opening is 30 mm (30 mm capacity) and the largest 52 mm (52 ​​mm capacity). Bar cutter with larger blade opening can be used to cut 2 or more smaller betonijzer as long as sufficient place, fulfilling the following formula AND betonijzer must be placed side by side:

Capacity BC squared (A)> Diameter betonijzer to be cut squared (B) x Number of betonijzer to be cut (C)

Example 1:

Bar cutter with a 52 mm opening will be used to cut 2 pieces of betonijzer with a diameter of 22 mm. To find out if the work can be done we use the formula above:

52 x 52 = 2704
22 x 22 x 2 = 968
What is 2704> 968? YES. So the work can be done.
Example 2:

Bar cutter with 36 mm openings will be used to cut 2 pieces of betonijzer with a diameter of 28 mm. Can this work be done? We use again the above formula:

36 x 36 = 1296
28 x 28 x 2 = 1586
Is 1296> 1586? NO. So the job can not be done.
TIPS: To extend the life of the cutter bar, use a cutter bar whose cutting capacity is not too mepet with the number and diameter of the workpiece to be cut.

Untuk keterangan lebih lanjut, silahkan download PDF ini :

phoneContact